|
Additional modules under developement:
LED-color changer Color-Fader
with 3 ultrabright light emitting diodes in red, green and blue each
as one chooses in SMD- or wired 3mm- or 5mm-LEDs
(preliminary data, alterations preserved)
BATT
Small, cheap, for battery with 3 AA-cells (batteries or accumulators)
The use of other batteries (AAA) or power supplies is possible, the voltage may not exceed 5 volts dc
24 different programs are stored.
Programswitching by shorten the programming pads. Shorten for more than 3 seconds stores the chosen programm and is the starting sequence when switching on.
One fixed speed
No protection against reverse polarity and against overvoltage
Power consumption: ca. 20 mA max. when changing colors
ca. 60 mA max., all colors on
Dimensions:
SMD: 17mm (B) x 18mm (L) x 3mm (H)
3mm-LED: 17mm (B) x 18mm (L) x 9mm (H)
5mm-LED: 17mm (B) x 18mm (L) x 12mm (H)
5V
For supply with 5 Volts, for example the 5 Volts of a computer or a stabilized wall power supply.The circuit is working well above 3,6 Volts.
24 different programs are stored.
Programswitching by shorten the programming pads. Shorten for more than 3 seconds stores the chosen programm and is the starting sequence when switching on.
One fixed speed
Optional:Varistor against overvoltage
Optional: variable speed
Optional: tactile switch for programming
Power consumption: ca. 20 mA max. when changing colors
ca. 60 mA max., all colors on
Dimensions:
SMD: 17mm (B) x 22mm (L) x 3mm (H)
3mm-LED: 17mm (B) x 22mm (L) x 9mm (H)
5mm-LED: 17mm (B) x 22mm (L) x 12mm (H)
NT
For supply with battery or dc-power-supply
Working voltage: from ca. 4 Volts to 14 Volts DC
Protected against confusion of the poles up to 40 Volts
Protected against thermal overload
24 different programs are stored.
Programswitching by shorten the programming pads. Shorten for more than 3 seconds stores the chosen programm and is the starting sequence when switching on.
One fixed speed
Optional:Varistor against overvoltage
Optional: variable speed
Optional: tactile switch for programming
Power consumption: ca. 20 mA max. when changing colors
ca. 60 mA max., all colors on
Dimensions:
SMD: 17mm (B) x 28mm (L) x 3mm (H)
3mm-LED: 17mm (B) x 28mm (L) x 9mm (H)
5mm-LED: 17mm (B) x 28mm (L) x 12mm (H)
Additional accessories for all types:
Switches
9-Volt-Clips (battery-clip with red/black litz)
Battery-case 3xAA
Battery-case 6xAA
Battery-case 8xAA
Battery-case 10xAA
|
