Zurück zur Startseite
Deutsch
English

DIMLED Dimmer-module, adjustable from 0-100%
for ultrabright light emitting diodes, high-power LEDs, Ledbars etc.,
no soldering needed

DIMLED
adjustable dimmer for LED-circuits
with ultrabright LEDs, Ledbars, Ledbars with high-power LEDs as Luxeon Stars in combination with LKO-modules, TTL-compatible dimmer-control with HKO constant-current-sources etc.

download datasheet

Digital, easy to use, dimmer-circuit for light emitting diodes. One of the first dimmers for LEDs on the market.
DIMLED

download connection plan:

Technical data:

  • Supply voltage:  min. 5 V to 30 Volts DC maximum
  • Input:               reverse polarity protection up to max. 40 Volts
  • Output current:  2500 mA max, can be upgraded with M/S Modules
  • Dimming:           0 to 100 % in 256 steps digital
  • Drop:                some millivolts depending on load
  • Connection:        Solder free connection by screw terminals with wire protection
    blue terminal = Input voltage (+ and - are marked)
    black terminal = Connection for the LED-circuit (marked with +LED-)
  • Dimensions:      20 mm (B) x 38 mm (L) x 25 mm (H) (without potentiometer)
  • Axis:                4 mm diameter
  • Drill hole:          6 mm are needed for the potentiometer
  • The axis can be shortened
  • Weight:            ca. 12 gram

*To view .pdf-files you need the AcrobatReader, free download at
 http://www.adobe.com/products/acrobat/readstep2.html

*To view .pdf-files you need the AcrobatReader, free download at
 http://www.adobe.com/products/acrobat/readstep2.html